Recreational Jet Raft
A shallow water jet boat for anglers, hunters, and outfitters who run rivers other boats can’t. Skinny water, rock-lined rapids, gravel bars, and remote backcountry access — the outboard jet keeps you moving where a prop would be finished, and the patent-pending TPU hull shrugs off the contact that comes with it.
14′ / 25 HP Jet · 16′ / 40 HP Jet · Custom Trailer Included
Starting at
Built for rivers, rapids, rocks & debris
Nothing hangs below the transom. Rivers, rapids, and shallow water are what destroy exposed propellers and dent aluminum hulls. The Seal Craft Jet Raft was built for exactly those conditions.
Outboard jet propulsion pulls water in and pushes it out — there’s no lower unit, no skeg, and no prop hanging down to catch a rock or a submerged log. That’s what lets you run gravel bars, debris fields, and inches of water that turn a conventional rig into a repair bill.
Get in earlier in the season, stay later, and reach the stretches that get skipped because everyone else has to turn around.
Propulsion
A Tohatsu jet outboard clears debris, rocks, and shallow gravel that shear pins and shred prop shafts. Run skinny water all season without babysitting a lower unit.
Patent-Pending Hull
The patent-pending inflatable TPU hull absorbs impact and flexes around and over obstacles — with puncture, tear, and abrasion resistance standard 1,200-denier PVC can’t match.
Weight
Light enough to trailer behind almost anything and launch off an unimproved bank. No ramp, no crew, no waiting in line at the access.
Who It’s For
Fish the upper stretches nobody floats. Push into backwater sloughs with a full spread of decoys. Move clients, gear, and game out of country that has no ramp and no cell service. The Jet Raft carries a real load and still runs skinny.
What Sets it apart?
Seal Craft builds every hull from 3,000-denier Thermoplastic Polyurethane (TPU). The molecular structure of TPU gives it far greater elasticity and impact absorption, so a TPU hull flexes around what it hits instead of tearing on it. TPU resists punctures, holds up to repeated abrasion, and keeps its shape after years of dragging across gravel and ice.
The TPU hull is rated to −140°F and includes an internal bladder system with over-inflation safety valves, so temperature swings and hard use don’t put you on the bank.
The result is a boat you can beach on rock, drag over a gravel bar, and load without worrying about the one contact that ends the trip.
Built With Purpose
Every detail on the Seal Craft Jet Raft is built for skinny water, swift current and hard use. The bottom is 3,000-denier TPU with an additional 1mm TPU film for extreme durability and puncture resistance, making it the strongest, most puncture resistant inflatable jet raft on the market.
CAT Pods and Aluminum Jet Intake
CAT Pods add lift and direct water into the tunnel hull, keeping the Jet Raft running in extremely shallow water and acting as steering strakes in swift current. The aluminum jet intake protects the tunnel and improves steering and jump in skinny water, run after run.
4mm Aluminum Transom
The transom is built from 4mm aluminum with an internal I-beam structural design. It increases durability and reduces weight compared to a traditional transom.
Tohatsu Jet Powered
A Tohatsu jet outboard drives the Jet Raft with no prop hanging below the hull. Run riffles, rocks and gravel bars without shearing pins or chewing up a prop.
Drop Stitch Air Floor with EVA Pad
The drop stitch air floor gives passengers a stable platform and stiffens the hull for better performance in swift water. A removable Cordura covered EVA pad protects the floor and adds a non-slip surface.
Bow Splash Hood and Bulwark Tubes
Front bulwark tubes and a bow splash hood keep spray out of the boat. Heavy duty D-rings along the tubes give you solid tie-down points for securing gear.
Padded Swivel Seats (Optional)
Standard seating is two bench seats. Upgrade to padded swivel seats with a frame and handlebar for comfortable long distance running.
Base Package
OPTIONAL UPGRADES
Boat chairs with safety handle bars
Elevated seating with a grab bar for running rough water and long days.
+$300
Get back aboard easily after wading, setting decoys, or swimming.
+$250
Kick-Back Jack Plate
Adjust engine height for the shallowest running and protect the intake in skinny water.
+$1,600
Every Jet Raft is sold as a complete, ready-to-run package. Hook up to the custom trailer and hit the water.
| Outboard | 430 Jet | 470 Jet |
|---|---|---|
| Hull Length | 14 ft | 16 ft |
| Max HP | 25 HP | 40 HP |
| Capacity | 1,500 lbs · up to 7 adults | 2,000 lbs · up to 8 adults |
| Trailer | Included | Included |
| Starting At | $26,995 | $28,495 |
Every unit includes the patent-pending TPU hull, Tohatsu jet drive, and custom trailer.
Ready to Launch
Tell us the water you run and we’ll help you pick the right configuration and the options that fit your purpose. Starting at $26,995 with the trailer included.
Tell us about your agency and mission. We will email your free Grant-Ready Kit right away, and our team can complete it for you with a written quote at no cost.
We have municipal financing options available for U.S. entities. Complete the form below and our financing team will contact you to determine options that fit your team and budget.
